IBT Technologies Inc.; 4028 Steinberg; Quebec, Canada H4R 2G7; 1-866-590-4288; info@ibt.ca

Call Toll Free:
1-866-590-4288


Francais Espagnol Chineese English Facebook


EPT
ISS
IBT Signage
Carrier Board for SMARC Modules
RP-101-SMC/RP-102-SMC Carrier Board for SMARC Modules


zoom
FEATURE
  • For SMARC form factor modules
  • 19V DC-in, reset, power, RTC function
  • Supports Gigabit LAN, audio, USB OTG, HDMI, COM (RS232/422/485)
  • Micro SD socket, Mini PCI-E with USB, SIM socket on board
  • 2x isolated CAN transceiver, TTL, LVDS, HDMI, CSI-MIPI camera


RP-101-SMC SPECIFICATIONS

Form Factor 
Standard Mini-ITX

RP-101-SMC 
SMARC V1.1 modules

RP-102-SMC 
SMARC V1.0 modules

Internal Header/ Connectors 
2x CAN bus 2.0B
1x 18/24bit single CH LVDS
1x 18/24bit TTL box header
1x LCD DDC (I²C)
1x LCD backlight connector
1x CSI-MIPI
2x USB 2.0 host
8x GPIO pin header
2x RS232 box header
1x SIM socket
1x SPDIF
1x Speaker box header
1x Micro-SD socket
2x I²C

Slots 
1x SATA II
1x Full-size Mini PCI-E with USB interface


Edge I/O 
1x DC-in Jack (12V)
1x Gigabit
1x Mic+Headphone
2x USB 2.0 host
1x USB OTG
1x HDMI
1x COM (RS232/422/485)

Jumpers, Switch and Buttons 
1x Boot media select switch (SD/eMMC)
1x Reset button
1x Power button
1x GPI button
1x (RS232/422/485) selection jumper
1x Backlight power jumper

Power 
19V DC-in

Dimensions 
170mm x 170mm (6.7” x 6.7”)

Devices 
Linux, Android

Software Support 
Non-operating: 3 Hz to 500 Hz, 15 mins

Certification 
CE/FCC Class A

Operating Temperature: -40° C to +85° C (-40°F~184°F)
Relative Humidity: 0 % to 90 % RH at 60° C (non-condensing)

RP-101-SMC


Order Information
RP-101-SMC - RISC Carrier Board for SMARC V1.0 modules,12V DC-in, Mini-ITX 170mmx170mm, 2x CAN, Mini PCI-E with USB, Resistive touch header (4-wires), 2x USB header,1x I²C header, 18/24 bit LVDS, TTL connector, Line in/ Line out, EEROM, CSI MIPI bus, 8x GPIO,2x RS232,1x RS232/422/485, VDDIO=1.8V -
RP-102-SMC - RISC Carrier Board for SMARC V1.0 modules,12V DC-in, Mini-ITX 170mmx170mm, 2x CAN, Mini PCI-E with USB, Resistive touch header (4-wires), 2x USB header,1x I²C header, 18/24 bit LVDS, TTL connector, Line in/ Line out, EEROM, CSI MIPI bus, 8x GPIO,2x RS232,1x RS232/422/485, VDDIO=3.3V -
© IBT Technologies Inc., 2008-2014 - All Rights Reserved * Information are subject to change without notice, Engineering specs may differ slightly. Picture is for reference only not actual product.
* Parts number may differ from ordering information.
...