IBT Technologies Inc.
Call Toll Free:
1-866-590-4288

Now On
FaceBook
IBT Technologies Inc.; 5405 Thimens; Quebec, Canada H4R 2H4; 1-866-590-4288; info@ibt.ca
FSP460-601U - 460 Watts 1U P4 / Xeon Power Supply
This product as been replace by PS-460W1U

Specification

FSP460-601U SPECIFICATIONS

  • Input Voltage: 100~240VAC full range
  • Input Frequency: 47~63Hz
  • Input Current: 9A max. 115Vrms at 60Hz; 5A max. 230Vrms at 50Hz
  • Inrush Current: 80A Max for 115V AV, 120A Max for 230V AC Cold Start
  • Hold Up Time: 18ms min. at full load & norminal input voltage
  • Output Power: +5V and +3.3V total output shall not exceed 200W
    +3.3V, +5V, and +12V total output cannot exceed 440W
    -5V and -12V total output not exceed 10W
  • Power Good Signal: Turn on delay 100~500ms, off delay 1ms minimum (TTL and CMOS compatible)
  • Efficiency: 65% min. at full load
  • Protection Over Voltage: +5V output 6.5V max.; +3.3V output 4.5V max.; +12Vdc output 15.6V max.
  • Over Load: 150% max.
  • Short Circuit: All Outputs
  • Thermal System: One Internal 12V DC 8cm ball bearing cooling fan
  • Temperature: Operating: 0~50°C
    Storage: -20~+80°C
  • Temperature Coefficient: 0.01% per °C
  • Humidity: 5~95% RH
  • Dimensions: 106 x 40.5 x 300 cm
  • MTBF: 100K hrs. at 25°C
  • Safety: UL 1950, CSA C22.2 Level 3, TUV EN60950, NEMKO EN60950 (CB Report), CE

Output Specification

Output Voltage
Min. Load
Max. Load
Load Regulation
Line Regulation
Ripple & Noise
+3.3V
0.5A
30.0A
+/- 5%
+/- 1%
50mV
+5V
0.5A
30A
+/- 5%
+/- 1%
50mV
+12V
2.0A
32A
+/- 5%
+/- 1%
120mV
-5V
0A
0.3A
+/- 10%
+/- 2%
120mV
+5Vsb
0A
2A
+/- 5%
+/- 1%
50mV
-12V
0A
0.8A
+9%/-5%
+/- 2%
© IBT Technologies Inc., 2008-2014 - All Rights Reserved * Information are subject to change without notice, Engineering specs may differ slightly. Picture is for reference only not actual product.
* Parts number may differ from ordering information.
...