Call Toll Free:
1-866-590-4288
|
|
FSP200-50PLA 1U 200Watts Pentium 4 Mini Power Supply
|
| FSP200-50PLA |
|
Feature
- Complied with Flex ATX and ATX12V standard
- Active Power Factor Correction Meeting with EN61000-3-2
- High efficiency and reliability
- Remote On/Off function
- Internal 12V DC fan included
- Noise Killer (Thermal fan speed control function)
- Low noise and ripple
- Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, NEMKO (CB Report), CE
Specification
| Temperature Range |
Operating 0° C ~ +25° C on full load |
| Storage & shipping -20° C ~ +80° C |
| Humidity |
95% on operating and 95% on storage |
| Dielectric Withstand |
Input to frame ground 1800V AC for 1 second |
| Efficiency |
68% at minimum measured at nominal AC main voltage and frequency with maximum load on all output |
| Rise Time |
Less than 20ms |
| Hold-up Time |
17ms minimum at nominal input voltage |
| Power Good Signal |
Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible) |
| Leakage Current |
Not exceed 0.75mA at 115V AC, 60Hz |
| MTBF |
100,000 hours on maximum load at +25° C degree |
| Dimension (WxHxL) |
81.5x40.5x150mm/3.2”x1.6”x6” inches |
|
Input Characteristics
| Input Range |
90~264V AC, Full Range Input |
| Frequency |
47 ~ 63 Hz |
| Input Current |
4A (RMS) @115V AC, 2A (RMS) @230V AC |
| Inrush Current |
50A Max for 115V AC, 80A Max for 230V AC Cold start |
|
Output Characteristics
| Voltage | Regulation Load | Minimum Load | Maximum Load | Peak |
| +3.3V | +/- 5% | 0.3A | 16.0A | - |
| +5.0V | +/- 5% | 0.3A | 13.0A | - |
| +12.0V | +/- 5% | 1.5A | 12.0A | 13A |
| -12.0V | +/- 10% | 0.0A | 0.8A | - |
| +5Vsb | +/- 5% | 0.0A | 2.0A | - |
+5V and +3.3V total output not exceed 61W
+3.3V, +5V, and +12V total output cannot exceed 180W
|
|
