Call Toll Free:
1-866-590-4288
|
|
I/O 8169SI universal PCI Multi-port serial card
|
| 8169SI |
|
Introduction
Universal PCI Multi-port serial card provides RS-422/485 Serial connection ports on your system for industrial communication and automation applications. The 8169 card works on both 32-bit and 64-bit PCI Bus with 3.3V or 5V power, allowing this multi-port serial card to be installed in virtually any PC system and compatible with all major operating systems. The card supports multi independent RS-422 or RS-485 ports, with each port transfer data up to 921.6 Kbps and able to control device in a multi-drop mode. Furthermore, Isolation and Surge protection (optional) can protect your equipment and controller from being damaged by static electrical charge and high energy spike. ARSC™ (Auto RTS Signal Control) technology provides the best way to make half-duplex RS-485 auto data transmission and receiving without software or writing extra code. In addition, RS-422/485 Auto Identify & Switch technology allows users the convenience of changing between RS-422 and RS-485 devices without jumper or switch setting. Universal PCI Multi-port serial card is the best solution for various industrial communication and automation applications.
Feature
- Low RMA rate and high reliability with single chipset designed ASIC
- Compliance with PCI ver. 2.2 spec. standard
- Supports both 64-bit & 32-bit PCI bus slot and 3.3V & 5V power
- Industrial grade design for stability and reliability
- 128K FIFO buffer can reduce CPU loading, less interruption and improving system performance dramatically
- RS-422/485 Auto Identify and Switch technology enable device plug-n-play without jumper or switch setting
- ARSC™ (Auto RTS Signal Control) technology allows accurate switching of the transmitter on and off for precise timing of the data transmission
- Optical isolation (2.5KV) provides protection against damage from static electrical charge
- Surge protection (600W) provides protection against surge damage from high energy spike
- RS-422/485 Handshaking Communication provides hardware flow control for best prevention of data error or data lost
- Plug-n-Play, I/O address and IRQ assigned by BIOS
- RS-422/485 industrial host controller series are certified by WHQL, CE, FCC approval
- Support Microsoft Windows, Linux, and DOS
Specification
| Function |
| Type |
Universal PCI Serial card |
| Mode of Operation |
Differential |
| Bus Transceiver |
RS-422 Full-Duplex |
| RS-485 Half-Duplex |
| Driver per Line |
RS-422: 1 Driver |
| RS-485: 32 Drivers |
| Receiver per Line |
RS-422: 10 Receivers |
| RS-485: 32 Receivers |
|
| |
| Hardware |
| Host Controller |
SUN1889 UART (16C650 compatible) |
| Bus Interface |
32-bit / 64-bit Universal PCI |
| 3.3V / 5V bus power |
| PCB Connector |
DB78F connector |
| Number of Port |
8 x RS-422/485 |
| Dimensions (WxD) |
180 x 108 mm |
| Bracket |
Standard 121 mm |
|
| |
| Communication |
| IRQ & I/O Address |
BIOS assigned |
| FIFO |
32 byte on-board FIFO |
| 128K byte assigned FIFO |
| RS-485 RTS Control |
Auto RTS Signal Control (ARSC™) |
| RS-422/485 Select |
RS-422/485 Auto Identify & Switch (AIS) |
| Baud Rate |
Up to 921.6 Kbps |
| Data Bits |
4, 5, 6, 7, 8 |
| Stop Bits |
1, 1.5, 2 |
| Parity |
None, Odd, Even, Space, Mark |
| Flow Control |
None, Xon/Xoff, RTS/CTS |
| Data Signal |
RS-422: Tx+, Rx+, Tx-. Rx-, RTS+, CTS+, RTS-, CTS- |
| RS-485: Data+, Data-, RTS+, CTS+, RTS-, CTS- |
|
| |
| Protection |
| Isolation Protection |
2.5KV Peak Pulse Power |
| Surge Protection |
600W ESD |
|
| |
| OS Support |
| 64-bit System |
Intel® Itanium® and AMD® Athlon 64® 64-bit CPU System |
| Microsoft |
Win 9x/ME/NT, Win 2K/XP/2003, Win CE |
| Linux |
2.0.x / 2.2.x / 2.4.x / 2.6.x |
| DOS |
DOS |
|
| |
| Operating Environment |
| Operating Temperature |
0 ~ 57 °C |
| Humidity |
5 ~ 95% RH |
| Storage Temperature |
-20 ~ 85 °C |
|
| |
| Regulatory Approvals |
| Hardware |
CE, FCC (Class B) |
| Driver |
WHQL |
|
Package list
- 8169 PCI Card
- Cable DB78M to 8 x DB9M or DB25M
- Software & driver CD
- User manual
|
|
